Support

eBrush The Easy Airbrush

The eBrush is the new airbrush system by Craftwell. It's the easy way to create beautiful airbrush effects using your favorite markers. The eBrush is lightweight and ergonomically designed, fitting the hand comfortably. The sleek, compact electric compressor can also run on a rechargeable battery, making it portable for airbrushing everywhere.
Simply insert your marker in the brand-specific adapter and turn on the eBrush to get started. Choose from three air pressure settings and adjust the airflow to meet your needs. The unique adapters enable you to change markers in second. Spend more time airbrushing and less time dealing with messy cleanups.
You can spray paper, card stock, vellum, vinyl, organza, grunge board, wood veneers, balsa wood, chipboard, Fun Foan, leather, canvas and metal. You can also use it on fabric and heat set your designs. With a Food Safe marker, creating food decor is fast & easy.
The eBrush is perfect for home, school, or professional use. It is ideal for all ages, however we recommend that children not operate the eBrush without adult supervision.
The eBrush has an MSRP of $149.99 and includes the eBrush, electric compressor, three Spectrum Noir markers and the matching marker adapter. Additional adapters are $9.99 each and the rechargeable battery is $49.99.
In additional to the Spectrum Noir marker adapter, there are adapters for Copic, Prismacolor, Sharie Fine Point, Chartpak AD and Tombow. This is also a rechargeable Ni-MH battery.
Yes, we are in discussion with other marker companies, including food safe and fabric marker manufactures to create adapters for their products.
Yes. The compact electric compressor can also run on a rechargeable battery, making it portable for airbrushing everywhere.
Click here to view our Warranty Policy.
Click here to view our Angel Policy.

Siphon Adaptor Kit

To avoid cross-contamination, thoroughly clean the siphon adaptor & its parts before first & after each consecutive use. Always use the siphon adaptor in a well-ventilated area.

Check Out The User Manual

How to Prepare & Properly Use Your Siphon

How to Assemble Your Siphon

Dilution Ratios

 

Thoroughly clean the siphon adaptor & its parts before first & after every use. This will limit cross-contamination & keep your siphon in working condition.
Designate the bottles & siphon cup to different liquid mediums to prevent cross-contamination.
While holding down on the eBrush trigger, adjust the nozzle until you achieve the desired spray.
Test on a surface other than your final surface to check the spray.
Please refer to the list of dilution ratios for various liquid mediums.
Please refer to the siphon assembly page to see all steps.
Please refer to the siphon preparation page to see all steps.
Click here to view our Warranty Policy.
Click here to view our Angel Policy.

Cut'n'Boss

Please read the user manual thoroughly before using the Cut'n'Boss Fully Automatic Embosser & Die Cutter as the Cut'n'Boss is compatible with most embossing folders & cutting dies.

Check Out The User Manual

Check Out The Platform Chart

 

Platforms should be stacked neatly one on top of the other with flushed edges.
Do not feed platforms into the Cut'n'Boss on an angle.
Do not force the platform combination into the machine.
Do not remove platforms until the motor has stopped running.
Once the motor has stopped running, remove platforms from the back of the Cut'n'Boss.
Please refer to the platform chart to see if it requires the embossing mat (sold separately).
Check that the cutting die is not damaged.
Check if too much material has been placed for cutting or embossing.
Click here to view our Warranty Policy.
Click here to view our Angel Policy.

eBosser

Please read the user manual thoroughly before using the eBosser Electric Embosser & Die Cutter as the eBosser is compatible with most embossing folders & cutting dies.

Check Out The User Manual

Check Out The Platform Chart

 

The eBosser is a fully automatic embossing and die cutting machine that handles letter size up to A4 size materials. It is electric for fast and easy operation.
The eBosser has an MSRP of $229.99 and includes the US AC power adapter, (3) base platforms, (1) magnetic shim, (1) cutting/embossing platform, (1) rubber embossing mat and a user manual.
Craftwell offers a full line of embossing folders for letter and A4 size materials. Folders are available for multiple occasions in either greeting card or full page pattern format. Other accessories include a rubber embossing mat and plastic shim.
The Platform A may arrive with minor scratches or smudges that occur during the manufacturing, shipping or packing process. This is normal and will not effect the performance or life of the platform. Platform A is designed to be used with cutting dies, allowing the blade to cut against the surface of Platform A. As a result, indentation will appear on Platform A when used in this manner. This is normal. To prolong the life Platform A, please flip and rotate for each use to ensure all sides are receiving equal treatment. Platform A is an accessory that will require replacement after repetitive use with cutting dies.
Yes. The eBosser includes a 100z-240v two prong US power adapter. International Craftwell distributors will sell machines with country specific plugs.
Yes, there is only one model of the eBosser. It will be available in a bundle package for international customers which will include the euro power adapter, (1) cutting/embossing platform, (1) shim, (3) base platforms, (1) rubber embossing mat, (1) A4 size embossing folder (not offered in the US), and a user manual. The rubber embossing mat is available for purchase separately in the USA.
The eBosser can emboss and die cut anything from paper (standard, flocked, glitter, magnet, adhesive backed), card stock, vellum, vinyl, organza, grunge paper, grunge board, wood veneers, balsa wood, chipboard, Fun Foam, leather, metal fabrics, sugar sheets and more!
The eBosser can handle up to letter size (8.5" x 11") or A4 (210mm x 297mm) size material. Optional Extended Adapter Platforms are available for use with the eBosser. The Extended Adapter Platforms include Platform A (8.5" x 24") and Platform D (8.5" x 24") for use with Accuquilt strip cutting dies.
Yes, the replacement cutting/embossing platform is available as a separate purchase. Complete platform sets will also be available.
The eBosser is perfect for home, school, or professional office use. The auto safety sensors in the eBosser make it ideal for all ages however we recommend that children not operate the eBosser without adult supervision.
Yes. This will depend on the type of embossing folder or cutting die used. For example, the eBosser can cut up to 8 layers of fabric at a time using certain dies.
No, at this time we do not offer custom embossing folders or cutting dies.
Yes, the eBosser can be used with Craftwell embossing folders, and products from Sizzix, Spellbinders, Cuttlebug, AccuCut, AccuQuilt, Ellison, QuicKutz, Lifestyle Crafts, Fiskars, and more!.
Click here to view our Warranty Policy.
Click here to view our Angel Policy.

IMPORTANT The eBosser is no longer being manufactured, however we continue to provide technical support and warranty service. The full line of accessories including embossing folders, cutting & embossing platforms, shims & mats are still available.

eCraft

Please read the user manual thoroughly before using the eCraft Electric Cutting System.

Check Out The User Manual

Check Out Troubleshooting Videos

 

Yes. The eCraft's unique design keeps the sheet secure with a series of rollers and guides without the need for a cutting mat. As the eCraft cuts, it leaves behind what we call "micro-tabs" which hold the material together until you pull it apart. The amount & size of tabs are adjustable depending on user preference. Once the cut out is pulled away, the tabs are virtually unnoticeable, leaving you with a perfectly smooth cut out. No more mess, fuss or risk of tearing when removing material from a mat. Plus you save money!
Paper (standard, flocked, glitter, magnet, adhesive backed), card stock, vellum, vinyl, organza, grunge paper, grunge board, wood veneers, chipboard and thin Fun Foam. Many fabrics can be cut as long as they are stabilized first using a press-on or iron-on stabilizer.
Yes! The eCraft's pressure setting range from 1 to 8 and you can increase the pressure by half level increments. You can use a low pressure setting to kiss-cut vinyl (cuts only the top layer) and a high pressure setting which a multi-cut (more than 1 pass of the blade) to cut through chipboard!
The eCraft cutting machine can handle paper up to 12" wide by ANY length! You can cut smaller pieces as well, we're all about saving money and using scraps! Although we don't recommend going smaller than 2" x 3".
The eCraft cutter can handle paper up to 12" wide, and the maximum width of an image you can cut is approximately 11¾". We've tested all of the images on our SD cards and set a predetermined minimum size for each one. Depending on how intricate the cut is, some images won't go smaller than 3" whereas others can go as small as half an inch. We've take the trial and error process out of it to help minimize wasting paper!
The number of sheets depends on the thickness/weight of the paper. There is a guideline on the tray to help you determine the maximum quantity, as well as an alert on the eCraft that tells you when the paper tray is empty.
We use high quality blades similar to those used in other cutters. Naturally, if you're cutting through vellum, blades will last longer than cutting thicker cardstock.
Yes, a pen and a blade are in the machine at the same time. Our images come with preset draw and cut lines. The eCraft draws first and then cuts without having to stop and swap or reset anything. Draw without cutting or cut without drawing is also an option with the eCraftshop software.
We use SD Cards similar to those used in digital cameras. They enable you to work independently of a computer and are available in different themes (Calendar, Travel, Waterlife, Swirls, Fonts, etc...) We currently have 19 SD Cards, each with over 150 images, and there's many more to come!
Yes, using a USB cable, but it is not required (see above).
eCraftshop Design Software is currently PC only. We do not have plans at this time to release a Mac version of the software. For Mac users, we recommend a third party software program called Sure Cuts A Lot by Craft Edge.
Yes, using our eCraftshop Design software. The software allows users to import SVG files and access True Type and Open Type Fonts, then establish draw and cut lines, or create your own images within the software using our design tools. Visit our online image store, eCraftcentral.com, and choose from hundreds of seasonal and everyday designs.
The eCraft uses a proprietary file format, however the eCraftshop Design Software allows you to import SVG files, automatically converting them for compatibility with the eCraft.
There is a full line of SD Image Cards ($49.99), 5 packs of Black and Primary Color ball-point pens ($12.99), 10 and 20 packs of blades ($19.99 - $34.99), Travel Bag w/ Wheels ($ 99.99).
The eCraft works with 110v - 240v and comes with a 3 prong US power plug. Currently, the eCraft requires an adapter for use in other countries, however, we are looking into offering other power cords.
Click here to view our Warranty Policy.
Click here to view our Angel Policy.

IMPORTANT The eCraft is no longer being manufactured, however we continue to provide technical support and warranty service. The full line of accessories including blades, pens, SD cards and digital images on eCraftcental.com are still available.