Yes. The eCraft's unique design keeps the sheet secure with a series of rollers and guides without the need for a cutting mat. As the eCraft cuts, it leaves behind what we call "micro-tabs" which hold the material together until you pull it apart. The amount & size of tabs are adjustable depending on user preference. Once the cut out is pulled away, the tabs are virtually unnoticeable, leaving you with a perfectly smooth cut out. No more mess, fuss or risk of tearing when removing material from a mat. Plus you save money!
Paper (standard, flocked, glitter, magnet, adhesive backed), card stock, vellum, vinyl, organza, grunge paper, grunge board, wood veneers, chipboard and thin Fun Foam. Many fabrics can be cut as long as they are stabilized first using a press-on or iron-on stabilizer.
Yes! The eCraft's pressure setting range from 1 to 8 and you can increase the pressure by half level increments. You can use a low pressure setting to kiss-cut vinyl (cuts only the top layer) and a high pressure setting which a multi-cut (more than 1 pass of the blade) to cut through chipboard!
The eCraft cutting machine can handle paper up to 12" wide by ANY length! You can cut smaller pieces as well, we're all about saving money and using scraps! Although we don't recommend going smaller than 2" x 3".
The eCraft cutter can handle paper up to 12" wide, and the maximum width of an image you can cut is approximately 11¾". We've tested all of the images on our SD cards and set a predetermined minimum size for each one. Depending on how intricate the cut is, some images won't go smaller than 3" whereas others can go as small as half an inch. We've take the trial and error process out of it to help minimize wasting paper!
The number of sheets depends on the thickness/weight of the paper. There is a guideline on the tray to help you determine the maximum quantity, as well as an alert on the eCraft that tells you when the paper tray is empty.
We use high quality blades similar to those used in other cutters. Naturally, if you're cutting through vellum, blades will last longer than cutting thicker cardstock.
Yes, a pen and a blade are in the machine at the same time. Our images come with preset draw and cut lines. The eCraft draws first and then cuts without having to stop and swap or reset anything. Draw without cutting or cut without drawing is also an option with the eCraftshop software.
We use SD Cards similar to those used in digital cameras. They enable you to work independently of a computer and are available in different themes (Calendar, Travel, Waterlife, Swirls, Fonts, etc...) We currently have 19 SD Cards, each with over 150 images, and there's many more to come!
Yes, using a USB cable, but it is not required (see above).
eCraftshop Design Software is currently PC only. We do not have plans at this time to release a Mac version of the software. For Mac users, we recommend a third party software program called Sure Cuts A Lot by Craft Edge
Yes, using our eCraftshop Design software
. The software allows users to import SVG files and access True Type and Open Type Fonts, then establish draw and cut lines, or create your own images within the software using our design tools. Visit our online image store, eCraftcentral.com, and choose from hundreds of seasonal and everyday designs.
The eCraft uses a proprietary file format, however the eCraftshop Design Software allows you to import SVG files, automatically converting them for compatibility with the eCraft.
There is a full line of SD Image Cards ($49.99), 5 packs of Black and Primary Color ball-point pens ($12.99), 10 and 20 packs of blades ($19.99 - $34.99), Travel Bag w/ Wheels ($ 99.99).
The eCraft works with 110v - 240v and comes with a 3 prong US power plug. Currently, the eCraft requires an adapter for use in other countries, however, we are looking into offering other power cords.
IMPORTANT The eCraft is no longer being manufactured, however we continue to provide technical support and warranty service. The full line of accessories including blades, pens, SD cards and digital images on eCraftcental.com are still available.